OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE_ WALKING BELT
Your treadmill features a walidng belt coated with
PERFORMANT LUBE_, a high-performance lubdcent.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause exceesive wear.
HOW TO PLUG IN THE POWER CORD
dsk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a
grounding plug. Plug the power cord Into a surge
protector, and plug the surge protector Into an
appropriate outlet that !s propedy Installed end
grounded In accordance with all local codes and
ordinances.
This product isfor use on a nominal 120-volt drcuif,
and has a grounding plug that looks like the plug Illus-
trated in drawing 1 below. A temporary adapter that
lookslike the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 ifa propedy grounded out-
let is not available.
The temporary adapter should be used only until a
propedy grounded outlet (drawing 1) can be installed
by a qualified eisctddan.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power. -
Voltage surges, spikes, and noise interference can.
result from westher con-
ditions or from other
appliances being tumed 1
on or off. To decrease
the poesibUity of your
treadmill being dam-
aged, always use a
surge protector (not
Included) with your
treadmUl.
Surge protectors are
sold at most hardware
stores and department
stores.Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or lass In length.
This product must be
grounded. If if should
malfun_on or break
down, grounding pro-
vides a path of least
resistance for electdo
current to reduce the
The green-colored dgid ear, lug, or the like extending
from the adapter mustb¢ connected to a permanent
ground such as a propady grounded outlet box cover.
Whenever the adapter is used it must be held In place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine If the outlet box cover Is
grounded before using an edaptar.
)utlet Box
=Pin
Plug
Protector
j,GrounGrOundedOutlet Box
Adapter
dlng Pin
, o oun o0 ,u0
To Next Page
Loading...
