--10--
[Ly-Ry] 2.0mm
Data Area Hor.ax.
Ly
Ry
Visual Characteristics
1. Test condition
• Resolution : Any of Preset modes
• Input level : 700mV
• Pattern : Central White box covering 20% of the data area
• Brightness Control : Default position (cut off)
• Contrast Control : Adjust to 100 cd/m2 of luminance (Center of the white field)
• Image duty cycle : 10% to 90%
• Magentic field : Horizontal = 0.3 Gauss
Vertical = 0.4 Gauss
• Supply Voltage : 100
240 VAC
• Operating Condition
Temperature (0 to 35)°C
Humidity (35 to 80)% (W/O condensation)
Altitude (0 to 3000)m
• Stroage condition
Temperature (-20 to 60)°C
Humidity (5 to 85)% (W/O condensation)
Altitude (0 to 15,000)m
2. Display Centering
The following describes the pattern for this test. Basically it is composed by a single pixel white line
around the perimeter of the data area, with marks for the horizontal and vertical axes, the
background is black.
The display centering shall be met as following specification at adjustied centering function (user’s
control)
[L-R] 4mm [U-D] 4mm
Display Cextering
U
R
D
L
3. Tilt
The maximum variation of the display rotation(tilt) shall be with in 2.0mm based on the following
formula.
To Next Page
Loading...