ADC-A12C31 Operator’s Handbook Rev. A P. 18
Configuration
The ADC-A12C31 may be configured using DIP switches or by the Windows software application
ADC-Set, USB Configuration Utility via the USB port.
The ADC-A12C31 ships from the factory with all DIP switch/software configuration offset
options set to off, in order to display UTC time.
This is the factory default configuration is defined as:
Time Code Date/Year Encoding
DIP Switches
Basic operation of the ADC-A12C31 is configured via the DIP switch banks accessible on the left hand
side of the rear electronics cover.
To Next Page
Loading...