EasyManua.ls Logo

Imagine ADC-A12C31 - Compliance; CE Marking; FCC Statement

Default Icon
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADC-A12C31 Operator’s Handbook Rev. A P. 6
Compliance
CE Marking
Electromagnetic Compatibility 89/336/EEC ; 92/31/EC ; 93/68/EEC ; 2004/108/EC
Tested and Conforms to the following EMC standards :
EN61000-4-2:2000 (Electrostatic Discharge)
EN61000-4-3 (RF Immunity)
EN61000-4-4 (Fast Transient Common Mode)
EN61000-4-5 (Surge)EN61000-4-6 (RF Injection Common Mode)
EN61000-4-8: 1993 (Power Frequency Magnetic Field)
EN61000-4-11 (Voltage Dips)
EN61000-6-3:2001 (EMC Emissions Generic Commercial)
EN55022:1998+A1:2000 +A2:2003
CISPR22
EN61000-3-2:2000 (Harmonic Current Emission)
EN61000-3-3:1995 + A1:2001 (Voltage Fluctuations & Flicker)
Low voltage directive 2006/95/EC
Tested and Conforms to the following Safety standards:
EN60950-1:2001 (Safety of Information Technology Equipment)
FCC Statement
This device complies with Part 15 of the FCC Rules and found to comply with the
limits for a Class B digital device. These limits are designed to provide reasonable
protection against harmful interference in a commercial/residential installation.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation

Table of Contents

Related product manuals