Imagine ADC-A12C31 - Set Date Time and Clock Hands

ADC-A12C31 Operator’s Handbook Rev. A P. 28
Time Code Settings
To use the automatic DST adjustments requires that date/year encoding is enabled.
This product contains an automatic detection and gain control circuit for the incoming SMPTE
30/25/24 fps longitudinal/linear time code or for IRIG-B(0) pulse width modulated or IRIG-B(1)
amplitude modulated time code.
To support common SMPTE/IRIG-B standard time codes without date/year encoding to the
aforementioned standards, an option of ignoring the date information encoded in the time code is
provided.