To Next PageTo Next PageWhat to do if Imation defender h100 Storage has insufficient power?
If your Imation Storage device isn't getting enough power, try connecting both USB connectors to your computer. If the LED continues to flash even after plugging in both connectors, it means your computer doesn't meet the USB power requirements.
What to do if Imation defender h100 Storage power detection has timed out?
If the power detection on your Imation Storage device has timed out, unplug all USB connections and then reconnect them.
Lists the requirements for using the Defender H100 with ACCESS Standard software.
Details the dual-head USB cable and power requirements for the Defender H100.
Explains where to find detailed instructions and online help for the Defender H100.
Provides instructions for connecting the Defender H100 to a computer using one or two USB ports.
Outlines the three main steps for personalizing the Defender H100 device.
Explains how to create an Administrator account and the importance of memorizing the password.
Describes how to create one or more general users on the device based on the chosen profile.
Details the steps for logging into and out of the Defender H100 device using a password.
Explains how to save and open files from the private partition using a file manager.
Provides instructions on how to safely disconnect the Defender H100 from the computer.
Explains the meaning of different LED statuses for authentication, data transfer, and power.
Details FCC compliance and residential use statements for the device.
General| Interface | USB 2.0 |
|---|---|
| Encryption | AES 256-bit hardware encryption |
| Authentication | Password protection |
| Compliance | FIPS 140-2 Level 3 |
| Operating Temperature | 0°C to 70°C |
| Compatibility | Windows, Mac OS, Linux |
