EasyManua.ls Logo

Imation SuperDisk LS-120 - User Manual

Imation SuperDisk LS-120
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Record
For your convenience, record the serial number
located on the side of the drive in the space
provided below. Please refer to it when you
contact Imation.
Serial No._____________________________________
Internal IDE Drive
User’s Guide
Imation Enterprises Corp.
1 Imation Place
Oakdale, MN 55128-3414
1 888 466 3456 phone
1 888 704 7100 fax
http://www.imation.com
info@imation.com
52-0000-5717-5 Rev. A 3/99

Table of Contents

Questions and Answers

  • D
    David SnyderJul 28, 2025
    What to do if CD-ROM doesn't work after installing Imation Storage?
    • G
      Gabriella SmithJul 28, 2025
      If your CD-ROM or another IDE device isn't working after installing the Imation Storage SuperDisk drive, first check your jumper settings to ensure the Master and Slave drives are correctly configured. Verify that your CD-ROM or other device is compatible. Try moving the SuperDisk drive to a different IDE channel or its own IDE channel. Finally, check all cable connections to ensure they are secure.
  • M
    Mr. William PerryAug 11, 2025
    Why can't my computer play music CDs after installing Imation Storage driver?
    • C
      Carmen BennettAug 11, 2025
      If your computer can no longer play music CDs after installing the device driver for Imation Storage, ensure you're using the newest CD-ROM driver available from the vendor and that it is a protected mode driver.

Summary

Users Guide

Imation Technical Support

Limited Warranty

Regulatory and Safety Information

Laser Safety Precautions

Pre-Installation Check

Items, Requirements, and Checks

Specifications

Hardware Installation Precautions

Safety Warnings Before Installation

Critical safety warnings and precautions for handling computer components during installation.

Hardware Installation Procedure

Troubleshooting Common Issues

Software and Booting Problems

Hardware Installation Procedure (Continued)

IDE and Power Connections

Detailed instructions for connecting IDE cables and power supply.

Jumper Settings and 5.25 Bay Installation

Details jumper configurations and installation into a 5.25-inch bay.

Maintenance

Head Cleaning Procedures and Warnings

Instructions and warnings for cleaning the drive heads using specific kits.

Testing the Installation

Windows Installation Verification

Software Installation Procedures

Driver Installation for DOS;Windows and Windows 95;NT

Guides for installing SuperDisk drivers on various operating systems.

Checking System Configuration

BIOS Compatibility for Bootability

How to check system BIOS compatibility for SuperDisk drive bootability.

Configure BIOS for Booting

BIOS Setup Example and Bootability Testing

Imation SuperDisk LS-120 Specifications

General IconGeneral
Storage Capacity120 MB
Form Factor3.5 inch
InterfaceUSB
CompatibilityCompatible with standard 1.44 MB floppy disks
Media TypeFloppy Disk

Related product manuals