Adaptable to various type of Lithium battery
B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo
and the new LiFe series of batteries.
Fast and storage mode of Lithium battery
Purposes to charge Lithium battery varies, ‘fast’ charge reduce the
duration of charging, whereas ‘store’ state can control the final voltage
of your battery, so as to store for a long time and protect useful time of the
battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based
on the principle of the Delta-peak voltage detection. When the battery's
voltage exceeds the threshold, the process will be terminated
automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your
NiCd or NiMH battery; it is useful for the NiMH battery of low impedance
and capacity in the 'AUTO' charging mode.
Temperature Threshold*
The battery’s internal chemical reaction will cause the temperature of the
battery to rise. If the temperature limit is reached, the process will be
terminated.
* This function is available by connecting optional temperature probe,
which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any possible
defect.
Input power Monitoring
To protect the car battery used as DC input power from being damaged, its
voltage keeps being monitored. If it drops below the lower limit, the
process will be ended automatically.
Capacity limit
The charging capacity is always calculated as the charging current
multiplied by time. If the charging capacity exceeds the limit, the process
will be terminated automatically when you set the maximum value.
Data store/load
The maximum five batteries’data can be stored for users’convenience.
You can keep the data pertaining to program setting of the battery of
continuous charging or discharging. Users can call out these data at any
time without any special program setting.
To Next Page
Loading...
