Entering within SETTINGS you can choose the following functions:
- CHANGE LANGUAGE: to define the communication language of the touch screen.
- SET DATE: to adjust the local date.
- SET TIME: To adjust the local time.
- TEMPERATURE °C/°F: to decide the display of the temperature in °C or °F.
- DISABLE TOUCH: to decide that, while using the machine, the only active button on the keyboard is the STOP
button (it is therefore impossible to change the parameters of the program in progress).
- USER PASSWORD: to customize the user password (the current one will be required)
- UPLOAD/DOWNLOAD PROGRAMS: to manage own set of programs
- BEEP KEYBOARD: to enable an acoustic signal with each typing or selection.
- PANEL MANAGEMENT: to move program icons to position, delete programs, select program icons
- UPLOAD ICONS FROM USB: allows you to load icons of custom programs through a special USB interface.
- LOAD SYSTEM ICONS FROM USB: allows you to load new custom system icons through a special USB
interface.
- MACHINE ON: allows you to manage the warning of the machine on when no ironing activity is in progress.
- PEDALS: allows you to manage the functionality of the pedalboard (if any)
- TEMP./VEL COMPENSATION: allows you to activate or deactivate the speed compensation according to the
temperature reached.
- MAX COMPENSATION %: defines in value % the compensation TEMP./VEL.
Entering inside REGISTRATIONS you can check the diagnostics of the machine:
- WORKING HOURS: the total working hours of the machinery can be verified.
- PROGRAM STATISTICS: you can check the total number of programs performed and the repetitions of each
individual program.
- DOWNLOAD RECORDINGS: you can download on usb the entire content of the recording’s menu.
- ENERGY STATISTICS: It is possible to consult the consumption of electricity referred to the last ironing cycle,
referring to the entire working day and referring to the total.
29. CALENDER MAINTENANCE
ATTENTION!
There is a risk of injuring yourself or damaging the equipment. Any ordinary or extraordinary maintenance
must be conducted by professionally qualified personnel. Make sure all power supplies are disconnected before
performing any type of maintenance.
Lock the interlocked switch.
For cleaning do not spray water or steam.
Ordinary and extraordinary maintenance are reported to follow with the expected cadences.
To Next Page
Loading...
