EasyManua.ls Logo

Immersion RC Vortex 230 Mojo - Lost M Odel a Larm

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lost Model Alarm
The Lost Model Alarm on the Vortex 230 Mojo  sounds when the quad is disarmed after landing, or if a receiver
failsafe occurs, this alarm can also be assigned to a switch from within the Betaflight Chrome app if desired.
The alarm is designed to be as simple as possible, without controls which could allow it to be accidentally
disabled, resulting in a lost quad, hence we suggest leaving it at the default setting.
The Touch’n’Race (TNR) Tag
The Touch’n’Race tag is located behind the plastic side-plate of the right-side of the quad (looking from the
back).
A TNR Wand or an NFC enabled Android phone with the NFC app may be used to not only query the video
transmission frequency before powering-up the quad, but also to set it to any of the supported channels before
powering up.
10