EasyManua.ls Logo

Immersion RC Vortex 230 Mojo - Specifications

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Flight Controller
IMU
Invensense SPI Gyro/Accelerometer, 8kHz loop speeds
CPU
STM32F303 32-bit ARM processor
Firmware
Betaflight compatible (with
API
version
matching
that
of
the
OSD)
OSD
CPU
STM32F373 32-bit ARM processor
Resolution
440H x 280V
Style
White, with black surround around all pixels
Output
Programmable Black/White levels
Video Tx Features
Transmitter Module
Custom, integrated into the FC/OSD board
Channels
40 Initially, programmed via OSD
Bands
5, including the ImmersionRC/FatShark bands, and RaceBand
Frequency, IRC/FS
5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880 MHz
Frequency, RaceBand, CH1..8
5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917 MHz
Frequency, ‘A’ Band, CH1..8
5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725 MHz
Frequency, ‘B’ Band, CH1..8
5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866 MHz
Frequency, ‘E’ Band, CH1..8
5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945 MHz
Power Output
1mW -> 600mW +/- 1dB, with regional locked SKUs *
Audio
Stereo, Right channel used for Telemetry, Left channel routed to onboard
mic.
Microphone
Onboard (Left Channel)
Recommended Antenna
Supplied SpiroNET v2 Omni, Skew Planar, 4 leaf
Glitch-free Channel Change
Supported
TNR Channel Change
Integrated (requires NFC Wand v1.1 or later)
*
Dynamic
power
control
always
on,
25mW
Max.
before
takeoff
Power Train
Standard Prop
HQ 5x4.3x3 V1S Black
Maximum Prop Size
5”
Stock Motors
BrotherHobby Returner R3 2206 2300kV
Recommended Battery
1300-1500mAh 4S >65C
42