Maintenance
The SmartDock needs to be kept clean. Make sure the claws are kept clean and oil
free. Check the claws periodically to make sure they freely open and snap shut. To
clean the SmartDock, use only warm water and mild detergent. Never lubricate.
Following any accident, the SmartDock should be thoroughly inspected for any
compromised components.
Air packs must be maintained in good condition and kept clean. Storing dirty, oily or
damaged bottles may affect the ability of the SmartDock to hold the bottle.
For additional information, visit
imminet.com/re-and-ems-vehicles/smartdock/.
13
SmartDock
®
Installation | User’s Guide
To Next Page
Loading...
