5
- Correctly train and educate the “QUALIFIED PERSONNEL” before allowing them access to the machine. The
personnel must also be exhaustively trained with regards to the machine’s protection devices.
- Ensure the machine’s safety devices are not tampered with or removed and are checked on a daily basis. Provide the
operator appropriate individual protection devices according to the laws in force.
- The constructor is available for clarification, assistance and training and declines all responsibility for damage to things
or people resulting from improper, incorrect and negligent use by untrained personnel.
1.08 STORAGE
WARNING
The appliance must be stored and conserved in the original packaging and in a closed
environment, protected from atmospheric agents with a minimum temperature of -15C°,
and a maximum of +60C° and a maximum humidity of 70 %.
1.09
TRANSPORTATION AND MOVEMENT
WARNING
In order to avoid irreparable machine damage, move with care, do not overturn, protect
from rain, do not stack, protect the packaging and its contents from bumps and sources of
heat.
During transportation and movement it is important to avoid bumps, overloading with other packages, exposure to
freezing or heating atmospheric agents, or any other potentially harmful condition to the device, things or people.
Machine transportation and movement must be entrusted to Qualified Personnel who can ensure correct movement.
DANGER
WARNING
Do not transport or move the product should it be impossible to respect the
conditions on the packaging or there be any doubts. Request information from
the constructor.
1.10
PACKAGING REMOVAL
After removing the packaging check the machine is complete and that there are no visibly damaged parts.
DO NOT USE THE MACHINE and refer to the constructor when in doubt.
DANGER
The components used for packaging (plastic bags, polystyrene, nails, screws, wood, etc)
must be kept out of reach of children, as they are sources of danger. These components
should be placed in the appropriate containers.
WARNING
In order to avoid bumps and overturn adopt the normal and logical precautions. Before
disposing of the packaging check all machine components such as accessories, utensils,
instructions, documents etc have been removed.
To Next Page
Loading...