Cheetah Pregius Camera with Camera Link – User Manual
July 6, 2018 Page 18 of 64 Rev 1.1
Figure 9: High side load driver.
2.3 Mechanicals
The camera housing is made of precision-machined aluminum. For maximum flexibility,
the camera has eight M3X0.5mm mounting holes located towards the front of the camera
on all four sides. An additional plate with ¼-20 UNC (tripod mount) and hardware ship
with each camera.
Figure 10: C2020, C2420, C2420Z, C4020, C4120 camera.
The following mechanical drawings show side, front, and back views of the C2020, C2420,
C2420Z, C4020, C4120 cameras.
To Next Page