To Next PageTo Next Page
Need help?Do you have a question about the Impex APEX and is the answer not in the manual?
Read all instructions and follow safety precautions before operating the machine.
Guide to identify hardware sizes in millimeters and inches for correct assembly.
Contact information and procedure for ordering replacement parts due to errors or omissions.
Assemble the Base Frame, Rear Vertical Frame, Front Vertical Frame, and Upper Frame components.
Install weight plates, guide rods, selector stem, and top socket assembly.
Attach butterfly support, pulley frame, cable guides, and pads to the front vertical frame.
Attach leg developer holder, seat, backrest support, and backrest.
Assemble front press bases, front press, and attach leg developer with grips.
Route the butterfly cable, attach pulleys and covers to the butterfly pulley frame.
Route cables to the upper frame, attach pulleys, and connect to the selector stem.
Route the cable to the leg developer, attach pulleys to brackets and the single floating pulley bracket.
Route cables through the front vertical frame, attach pulleys to front press and back brackets.
Attach weight plate covers and securely tighten all nuts and bolts from previous steps.
Instructions and contact details for ordering replacement parts from IMPEX INC.
General