EasyManua.ls Logo

Inalto ICG905W - Using Your Cooktop; Burner Operation and Flame Control; Manual Ignition Procedure

Inalto ICG905W
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Using Your Cooktop
Figure 3
Both rings of the wok
burner operate in the
highlighted range of
knob rotation
STANDARD BURNER
TRIPLE RING WOK BURNER
NOTE: Gas controls turn anticlockwise from
‘OFF’ and have limited movement
CAUTION:
Keep hands clear of burners when lighting.
If burner does not light within 5 seconds, turn
knob to ‘OFF’ position, wait to allow gas to
disperse and then try lighting again.
Burners MUST be operated between ‘HIGH’
and ‘LOW’ settings only.
To light a burner, the knob must be turned to
the
, then pushed down as far as possible
for approximately 5 seconds. If the ame goes
out when the knob is released simply depress
the knob again, this time holding it down with
slightly more force for the same length of time.
The height of the ame can be varied by turning
the control knob toward the ‘LOW’ position.
NOTE: When the wok burner is turned to low
only the small inner ring stays lit. This is a normal
function of the dual wok burner to provide a very
low power ame option.
In the absence of electrical power, carry out the
ignition directly to the burner with a hand held
ignition source.

Related product manuals