Inateck BCST-73 - Inventory Mode Usage

15
EN
4.Scan“ExitwithSave”Barcodetoendthesetting
ExitwithSave
Note:Refertothesettingof“delete0digitcharacter”ifnocharactershouldbedeleted.
InventoryMode
UsersmayuseinventorymodetokeepscannedbarcodesinthebufferofInateckBCST-73,
anduploadthemtocomputerinbatches.Underinventorymodeusersarenotrestricted
tothetimeandlocationwhenuploaddata.Ofcourse,historydatacanbeclearedinbuffer.
Moredetailsaboutinventorymodeareasbelow.
1.ScanthebarcodetoenterInventoryMode
2.ScanthebarcodetoreturntoCommonMode
3.Scanthebarcodetocleardatainbuffer(forInventoryModeonly).
EnterInventoryMode
（*）ReturntoCommonMode
ClearDatainBuffer(forInventoryModeonly)