Inateck BCST-73 - BCST-73 Scanner Recharging

19
EN
TransferEAN-13toISSN
（*）DonottransferEAN-13toISSN
EnableEAN-2
EnableEAN-5
（*）DisableEAN-2
（*）DisableEAN-5
TorechargetheBCST-73barcodescanner
Whenthescanneris lowinbattery,theyellowindicator flashes.Torechargethe
barcodescanner,pleaseusetheUSBcableincluded,andconnectthebarcodescanner
totheUSBportofaworkingcomputerora5Vcharger.Whenthebarcodescanneris
beingrecharged,theredLEDindicatorison.Itgoesoffwhenthebarcodescannerisfully
recharged.