34
Useful InformationUseful Information
Draining the Water to Prevent Freezing
Set the
【
Seat Temp.
】
to "High" and close
the toilet lid (
☞
Page 11).
Turn off any active power save function
(
☞
Page 27).
Manipulate the water drain plug in your
building to drain water from the pipes.
* Do not close the water shutoff valve when
manipulating the water drain plug.
* Refer to the drain plug User's Manual for more
information on the exact procedure.
Press the
【
Flush Full
】
button or press the
ush button on the toilet body.
* Wait approximately 20 seconds.
* Con rm that the water does not ow when
attempting to ush the toilet.
Drain water from the toilet body
* Refer to steps
and
of the "Draining Water"
procedure on page 39 to drain the water from the
toilet bowl.
Reattach the side cover (
☞
Page 45).
Reusing the toilet
Always perform the necessary preparations and
checks before use. (
☞
Page 8)
If water has frozen and the shower does not
operate
If the water supply hose or water supply
connections have frozen and the shower does
not operate, use a cloth immersed in warm water
to warm the water supply hose or water supply
connections to slowly thaw them, or warm the toilet
room and allow them to thaw naturally.
[CAUTION]
Do not pour hot water or blow hot air over the
water supply hose.
* Doing so may result in damage to the water
supply hose.
Water may be discharged during the thawing
process depending on the parts being warmed.
Con rm the condition regularly during the thawing
process.
To Next Page
