Inax SATIS S - Preparation and Checks before Use; Open the Water Shutoff Valve; Connect the Power; Vacuum Breaker

8
Please Read This FirstPlease Read This First
 Only 220-240 VAC
outlets must be used.
 Do not connect too
many cords to a single
electrical outlet.
* Doing so may cause  re.
PROHIBITED
WARNING
Deodorizing  lter
<Inside the nozzle shutter>
(
☞
Page 44)
Deodorizing  lter
* The  gure illustrates an open nozzle shutter.
(
☞
Page 43)
Vacuum breaker
Vacuum breaker
* The vacuum breaker is located in the toilet
body. Check the vacuum breaker on a regular
basis.
Open the Water Shutoff Valve
* If the water shutoff valve is closed, turn it
counterclockwise to open.
* If the open/close knob is dif cult to turn, grasp it with
a dry cloth and turn.
STEP
1
Connect the Power
 Insert the power plug
into a 220-240 VAC
outlet.
* Check that the power indicator LED on the power
indicator is green.
If the power indicator is not green, press the
【
Power

button on the remote control.
STEP
2
[CAUTION]
 Wait about 10 seconds before reconnecting the power plug.
Preparation and Checks Before Use
* Make sure to perform the
following checks before using the
shower toilet for the  rst time.
Open
Water shutoff
valve
Open/close
knob

Power

Power plug