Appendix D Page D - 1
D
D Appendix D
Part Number Codes
Tank Sentinel Part Numbering
The Tank Sentinel tank gauges and leak detection systems are available in many
different configurations. You can determine what features a particular console has
by its part number... press
CHECK
then
M4
to display the part number code.
Example Part Numbers
T1P/0 = TS-1001 with Printer / Ø tanks (Ø tank defines a Leak
Detection Monitoring System or LDS).
NOTE: The T in the
part number represents a standard power configuration
( Single pole 120 V AC, Neutral and Ground )
T1PM/2SFLR = TS-1001 ATG with Printer, Modem / 2 tank, SCALD, Fax and
Data (modem), TS-LLD (RS-485 Line Leak Detector) and
Reconciliation
T1P/4GC = TS-1001 ATG with Printer / 4 tank, Generator (interface - this
type of system is primarily used with Backup Generator
applications) C anadian (export only)
V1PM/4FL = Export only... single pole 240 VAC, Neutral and Ground power
configuration, TS-1001 with Printer, Modem / 4 tank, Fax and
Data (modem), with TS-LLD (RS-485 Line Leak Detector)
T504PM/4F = TS-504 with Printer, Modem/ 4 tank, Fax and Data (modem)
T504P/4CR = TS-504 with Printer/ 4 tank, Canadian, Reconciliation
— Continued on next page —
To Next Page
Loading...
