Incon task sentinel TS-1001 User Manual

13 Page 13 - 2 Tank Sentinel Setup Programming Guide
Clock / Calendar Menu
CLOCK/CALENDAR
DAY SAV Press
M1 key.
DAYLITE SAVINGS Use
UP/DOWN ▲ ▼ keys to show choices.
ENABLED Enable = allows daylight savings time changes
DISABLED Disable = does not
Press
ENTER key to accept this data.
TM STYLE (Select the time style - (12 or 24 hour) for display,
TIME STYLE reports and faxes)
12 HOUR Use UP/DOWN ▲ ▼ keys to show choices.
24 HOUR Press
ENTER key to accept this data.
DT STYLE (Select the date style - (Month/Day/Year) for display,
DATE STYLE reports and faxes.)(YY = Year, MM = Month, DD = Day)
MM/DD/YY
DD/MM/YY Use UP/DOWN ▲ ▼ keys to show choices.
YY/MM/DD Press
ENTER key to accept this data.
SET TIME (Input current time in 24-hour format)
SET SYSTEM TIME 2 digits are required for hours, minutes, seconds –
HH:MM:SS use leading zeros before single digits,
(for example input ‘05’ not ‘5’)
Use keypad to input time data.
Press
ENTER key to accept this data.
SET DATE
SET SYSTEM DATE (Input current DATE )
YYYY:MM:DD (YYYY = year, MM = Month, DD = Day)...
2 digits are required for month and day –
use leading zeros before single digits,
(for example input ‘04’ not ‘4’)
Use keypad to input DATE data.
Press
ENTER to accept this data.
SET DAY
SET SYSTEM DAY OF WEEK (Select the current day of the week)
SUNDAY
MONDAY Use UP/DOWN ▲ ▼ keys to show choices.
TUESDAY Press
ENTER to accept this data.
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
TABLE 13.1 24 Hour Time Input Format
HH:MM:SS
00:00:00 = midnight
22:00:00 = 10 pm + 12 ( hours )
( add 12 hours to pm times starting at 1 pm to 11:59 pm )
02:05:00 = 2:05 am

Incon task sentinel TS-1001 Specifications

General

Brand	Incon
Model	task sentinel TS-1001
Category	Measuring Instruments
Language	English