Indel B SW CUBE 12V User Manual

6.2 - SECURING TO SEAT
WARNING: while driving it is necessary to secure “CUBE” in a stable and safe manner in order to
avoid accidental falls and damage to people and things.
If “CUBE” is placed on the passenger’s seat there is a method to secure it by using the vehicle’s seat belt.
WARNING: if placed on the seat it is necessary to secure “CUBE” in a stable and secure manner even if the
vehicle is idle
If “CUBE” is placed in another location, you can use the supplied sling to secure it in the best possible manner.
Securing by means of the vehicle’s seat belt
1
Place “CUBE” on the seat (with the exit nozzles set towards the driver).
Solution 1
2
Thread the vehicle’s seat belt through “CUBE”’s
handle near the seat’s backrest: insert it from
below, wrap it around the handle and fasten the
buckle.
Solution 2
2
In case the buckle cannot be threaded through
the handle, employ the following procedure:
fasten the seat belt; now thread the supplied sling
(L) through “CUBE”’s handle, through the seat
belt’s horizontal and oblique straps and close the
ring with the sling’s buckle; tighten as much as
possible in order to have a secure hold.
28
SW CUBE 12V
SW_CUBE_12V_20-02-2019

Indel B SW CUBE 12V Specifications

General

Brand	Indel B
Model	SW CUBE 12V
Category	Air Conditioner
Language	English