HOT MODE: connect 1 piece of flexible tubing (B) between one air output nozzle (1 or 2) and opening 3
unused air output nozzle (1 or 2) must be sealed with the supplied lid (D) placed in the opening (C).
will exit from opening 4.
This mode does not use the snorkel (E).
If you wish to ventilate air remotely, connect another supplied piece of tubing (B), securing it to opening 4.
7.0 - FUNCTION
Function modes of “CUBE”
can be manually managed from the command panel or remotely by using the remote
control.
The remote control manages all main functions, but setting adjustments can be performed only through the
control panel.
WARNING: changing the standard settings must be carried out only by qualified personnel. Any
change performed without the proper skills may cause damage to “CUBE” and/or to the vehicle.
ENGLISH
37
To Next Page
Loading...
Need help?
General
