interior lamp, you will probably never operate any of these
switches while in motion on a paved road.
1
1 2 3 4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1.
EXT 2: If
equipped – Switch on or o 25A circuit A (front
right roof outlet), of the exterior roof power outlets.
2.
EXT 3: If equipped – Switch on or o 25A circuit B (front
left, rear left, and rear right roof outlet), of the exterior
roof power outlets.
3.
EXT 4: If
equipped – Switch on or o, the front winch (If
equipped) and rear high amp outlet (NATO outlet).
4.
EXT 5: If equipped – Switch on or o the 25A under hood
power preparation.
5.
INT 2 Switch on or o the 10A right footwell power
preparation.
6.
INT 1 Switch on or o the 10A left footwell power
preparation.
7.
O-Road Mode: Activate or Deactivate O-Road Mode.
8.
Wading Mode: Activate or Deactivate Wading Mode.
9.
LED Auxiliary High Beam Lights: Switch on or o to prime
the LED Auxiliary High Beam Lights. When the main
beam is switched on, then the LED Auxiliary High Beam
Lights will activate. O-Road/Wading Mode must be
activated.
10.
Exterior Head Lights Level: Adjust the level of the Exterior
Head Lights.
11.
Reading Lamp: Switch on or o, the Reading lamp.
12.
Automatic Interior Lamps: Interior Lamps will illuminate
when a door is opened.
13.
Interior Lamps: Switch on or o the Interior Lamps.
14.
Reading Lamp Switch on or o the Reading Lamp.
OVERVIEW
33