Headlamp high beam ash
To ash the high
beams, pull the left lever stalk toward the driver
to activate the headlight and then release back to the starting
position to deactivate the headlight. This will result in the
headlight ashing on and o once. Repeat for consecutive ashes.
Headlamp range adjustment
You can adjust the range or your headlamps to account for weight
distribution that may cause the front of your Grenadier to pitch
higher or lower than normal. Always adjust the headlamps to
maintain adequate illumination of the road and space in front of
your Grenadier, without
blinding or annoying other drivers and
road users. Turn the thumb wheel
located in the Overhead
Control Panel, to the required switch position.
To adjust the headlamps:
1.
Park your Grenadier on level ground.
2.
Adjust the vertical eld
of the headlamps according to
the load using the thumb wheel.
POSITION LEAD CONDITION
0
Driver only, or driver and front passenger seats
occupied; cargo area empty
1 All seats occupied; cargo area empty
2
All seats occupied by adults; cargo area at
maximum
3 Driver only; cargo area at maximum
WARNING: It is important to adjust the headlamp range
if a heavy
load has lowered the back of your Grenadier
and thereby raised the head lamp angle. Failure to
adjust the headlamp range may temporarily blind other
road users resulting in an accident and in serious injury
and death. Always restore their position to 0 once your
Grenadier is level again.
OVERVIEW
41
To Next Page
Loading...