Your Grenadier is automatically in P (Park) when:
The driver seat belt is unbuckled and the driver’s door is
not latched.
The engine is switched o with the
transmission in D
(Drive) or R (Reverse).
To operate the gear selector:
Make sure the driver seat belt is buckled; this is required
to shift from P (Park).
If shifting into or out of P (Park), R (Reverse), or D (Drive)
press the brake
pedal and make sure your Grenadier is
stopped.
Press and hold the gear selector release button on the
left side of the selector handle.
DRIVING ON ROAD
103
To Next Page
Loading...