26 tina83e1-d (2018-12)
Mount the gauge so that no vibrations occur. Vibrations at the
gauge cause a deviation of the measured values.
The gauge may be mounted in any orientation. To keep conden-
sates and particles from getting into the measuring chamber
preferably choose a horizontal to upright position.
For potentially contaminating applications and to protect the
measurement system against contamination, installation of the
optional seal with centering ring and filter is recommended
(Options → 57).
Remove the protective lid and connect the product to the
vacuum system.
or
Protective lid
Seal with centering
ring and filter
Clamp
Seal with centering ring
Keep the protective lid.
To Next Page
Loading...
Need help?
General
