-13 EVAL-M1-183M User Manual
EVAL-M1-183M User Manual
iMOTION™ Modular Application Design Kit
About this document
Scope and purpose
This application note provides an overview of the evaluation board EVAL-M1-183M including its main features,
key data, pin assignments, mechanical dimensions and its application.
EVAL-M1-183M is an evaluation-board as part of the iMOTION™ Modular Application Design Kit (MADK). This
board features and demonstrates Infineon’s advanced Motion Control Engine (MCE) for permanent magnet
motors drive over the full speed range.
The evaluation board EVAL-M1-183M was developed to support customers during their first steps designing
applications with running any permanent magnet motor via sensorless sinusoidal control.
Intended audience
This application note is intended for all technical specialists working for motor control with the EVAL-M1-183M
board under laboratory conditions.
Table of Contents
About this document ....................................................................................................................... 1
Table of Contents ........................................................................................................................... 1
1 Safety precautions ......................................................................................................... 2
2 Introduction .................................................................................................................. 3
3 Main features ................................................................................................................ 4
3.1 Key data ................................................................................................................................................... 5
3.2 IRMCF183 installer ................................................................................................................................... 7
4 Pin assignments ............................................................................................................ 8
5 Getting Started with EVAL-M1-183M ............................................................................... 10
5.1 Setting up the system............................................................................................................................ 10
5.2 iMOTION™ development tools and software ....................................................................................... 12
5.2.1 MCEProgrammer setup overview .................................................................................................... 12
5.2.2 MCEWizard setup overview .............................................................................................................. 14
5.2.3 MCEDesigner setup overview .......................................................................................................... 16
6 Schematics and Layout .................................................................................................. 17
6.1 IRMCF183M Schematic Overview .......................................................................................................... 17
6.2 Current feedback ................................................................................................................................... 18
6.3 AD port Input ......................................................................................................................................... 19
6.4 PCB Layout ............................................................................................................................................ 20
7 Bill of Materials of EVAL-M1-183M ................................................................................... 23
8 Reference .................................................................................................................... 25
Revision History ............................................................................................................................ 26
To Next Page
Need help?
General
