3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
173-
• The horizzontal and vertical motion unit are specified by GS
P.
• The GS P command can change the horizontal (and verti-
cal) motion unit. However, the value cannot be less than the
minimum horizontal movement amount.
• In standard mode, the vertical motion unit is used.
[Default]
[Reference] GS P
[Example]
kd...1dHnLnm*CSEkd...1dHnLnm*CSE
kd...1dHnLnm*CSE
kd...1dHnLnm*CSEkd...1dHnLnm*CSE
[Name] Select bit image mode
[Format] ASCII ESC * m nL nH d1...dk
Hex 1B 2A m nL nH d1...dk
Decimal 27 42 m nL nH d1...dk
[Range] m = 0, 1, 32, 33
0 ≤ nL ≤ 255
0 ≤ nH ≤ 3
0 ≤ d ≤ 255
[Description] Selects a bit image mode using m for the number of dots
specified by nL and nH, as follows:
for the 204 dpi model :
medoM
noitceridlacitreVnoitceridlatnoziroH
stod.NIPDIPD)k(ataDfo.N
0
elgnistod8
ytisned
886201652xHn+Ln
1
elbuodtod8
ytisned
886402652xHn+Ln
23
elgnistod42
ytisned
424022013x)652xHn+Ln(
33
elbuodtod42
ytisned
424024023x)652xHn+Ln(
www.ipcprint.com
To Next Page
Loading...