InfiRay EH35 User Manual

InfiRay Outdoor • EYE III Series • User Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission. - 9 -
the Controller (3) to select the option.
⚫ Photographing / Video recording: On the home screen, briefly press
the Camera button (4) to start / stop a video recording. And long press
the Camera button (4) to take a photo.
⚫ Background Calibration: Cover the lens cap (9) and finish the
background calibration. After the calibration, open the cap (9), or set the
device to standby mode or shut it down as prompted by the icon.
⚫ Standby: The device can be set
to standby mode by: a) covering
the lens cap (9) and then rotating
the Controller (3); or b) pressing
the Controller (3) + Camera
button (4) at the same time on
the home screen.
⚫ In the standby mode, rotate the
Controller (3) to wake up the
device, and briefly press the
Camera button (4) to power off
the device.
⚫ Power off: On the home screen, press and hold the Controller (3) +
Camera button (4) at the same
time to enter the power-off
countdown interface. The device
will be powered off when the 3s
countdown ends. And the
shutdown can be stopped by
rotating the Controller (3) before the countdown ends.
⚫ Note: if the standby time exceeds 30 minutes, the device will
automatically shut down.
9 Status Bar
The status bar is located at the top of the image interface and displays the
information related to the current operating status of the device.
1. Current image mode ( : White hot; : Black hot; : Red hot; :
Rainbow)
2. Current digital zoom (1.0× to 4.0× adjustable, with an interval of 0.5,

InfiRay EH35 Specifications

General

Brand	InfiRay
Model	EH35
Category	Monocular
Language	English