InfiRay Outdoor • EYE III Series • User Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission. - 22 -
Download and install the InfiRay Outdoor at the official website
(www.infirayoutdoor.com) or app store or scanning the QR code below.
18 Technical Inspection
It is recommended to carry out a technical inspection each time before using
the monocular. Check the following:
⚫ The appearance (there should be no cracks on the body).
⚫ The condition of the object lens and eyepiece (there should be no cracks,
greasy spots, dirt or other deposits).
⚫ The battery status (it should be charged).
⚫ The controller/button should be in working order.
19 Maintenance
The maintenance should be carried out at least twice a year and includes
the following steps:
⚫ Wipe the surface of metal and plastic parts to clear off dust and dirt with
a cotton cloth. Silicone grease may be used for cleaning process.
⚫ Clean the electric contacts and battery slots on the device using a non-
greasy organic solvent.
⚫ Check the glass surface of the eyepiece and lens. If necessary, clear off
the dust and sand on the lens (it is perfect to use a non-contact method).
Use a specialized wiping tool and solvent to clean the optical surfaces.
20 Legal and Regulatory Information
Wireless transmitter module frequency range:
WLAN: 2.412-2.472GHz (For EU)
Wireless transmitter module power < 20dBm (only for EU)
We, IRay Technology Co., Ltd., hereby declares that the
radio equipment EYE III series is in compliance with the
To Next Page
Loading...
