EasyManuals Logo

InFocus IN1503 Quick Start Guide

InFocus IN1503
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Turn on projector and source
1
Connect the power cord to the projector
and to an electrical outlet
The power light on the projector will light amber.
2
Remove the lens cap
3
Turn on the projector
Touch the power light (or press power on the remote).
The power light will start blinking green.
4
Wait for the lamp to warm up
After a few seconds, the power light will stop blinking, and
the other buttons on the keypad will light up. It can take a
minute for the lamp to reach full brightness.
Warning:
Do not look directly into the lens while
the projector is being used.
5
Turn on computer or other source
If your computer is connected to the DisplayLink connector,
follow the instructions on your computer's screen. Otherwise,
you may need to press a specific key combination to activate
your laptop's external video port. On most laptops, hold
down the FN key while pressing a key labeled CRT/LCD, LCD/
VGA, a monitor icon , or similar. Key combos for popular
models:
Apple F7 HP/Compaq Fn+F4 or Fn+F6 Sony Fn+F7
Dell Fn+F8 IBM ThinkPad Fn+F7 Toshiba Fn+F5
Fujitsu Fn+F10
Complete laptop activation chart at www.infocus.com/support
Important:
If there is still no video, restart your
computer (first make sure it's connected to the
projector and the projector is turned on).
6
Change source if needed
If needed, press
source
(on the projector or remote) to view
the source. You may have to press it more than once.
TURN OVER
i
5-10 sec.
source
All manuals and user guides at all-guides.com

Other manuals for InFocus IN1503

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus IN1503 and is the answer not in the manual?

InFocus IN1503 Specifications

General IconGeneral
Matrix size0.65 \
Native aspect ratio16:10
Projection distance0.76/3.51 m
Projection technologyDLP
Supported aspect ratios4:3, 5:4, 16:9, 16:10
Contrast ratio (typical)1800:1
Screen size compatibility- \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-30/30 °
RS-232 ports0
FocusManual
Offset105 %
Throw ratio0.72 - 0.86:1
Focal length range- mm
Lamp power165 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
RMS rated power1 W
Number of built-in speakers1
Audio (L/R) in-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level29 dB
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)170 W
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, PAL, SECAM
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth222 mm
Width235 mm
Height83.8 mm
Weight2000 g
Package weight4300 g

Related product manuals