38
3 Select WLAN from source list. AP Info page displays.
4 Establish WiFi connection with your source device first, and launch EZ Display/
EZ Remote app on your mobile device.
EZ Remote
Launch EZ Remote. You will see the connected device shown on the device list.
Click it to enable Remote control.
*Skin button is reserved for future feature.
EZ Display
Launch EZ Display and it will scan for and list the device's IP address. When you
click the device, a passcode is required. Enter the 4 digit number shown on your
projector. After entering the correct passcode, EZ Display will display and allow
you to select the different feature options.
AP Info
AP IN124a-380343
IP 192.168.111.1
PSK
PassCode
3522
iOS screen
Android screen
iOS screen
Android screen
iOS screen
Android screen
AP Info
AP IN124a-380343
IP 192.168.111.1
PSK
PassCode
3522
To Next Page
Loading...
