EasyManuals Logo

InFocus IN2124a User Manual

InFocus IN2124a
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
55
Replacing the projection lamp
The Lamp Hours timer in the Projector Info menu counts the number of hours the
lamp has been in use.
NOTE: Be sure to use the InFocus lamp module designed for this projector.
You can order new lamps from www.infocus.com (in select areas), your
retailer or your dealer. Only genuine InFocus lamps are tested for use in this
projector. Use of non InFocus lamps may cause electrical shock and fire, and
may void the projector warranty. InFocus is not liable for the performance,
safety or certification of any other lamps.
WARNINGS:
The projector uses a high-pressure mercury glass lamp. The lamp may fail
prematurely, or it may rupture with a popping sound if jolted, scratched, or
handled while hot. The risk of lamp failure or rupture also increases as the
lamp age increases; please replace the lamp when you see the “Replace Lamp”
message.
To avoid burns, allow the projector to cool for at least 60 minutes before you
replace the lamp.
Do not touch or block the projector lens with any objects as this can damage
the projector lens. Scratches, gouges and other lens damage are not covered
by the product warranty.
Unplug the power cord before replacing the lamp.
Do not drop the lamp module. The glass may shatter and cause injury.
Do not touch the glass surface of the lamp module. Fingerprints can obscure
projection sharpness and may cause the glass to shatter.
Be extremely careful when removing the lamp housing. In the unlikely event
that the lamp ruptures, small glass fragments may be generated. The lamp
module is designed to contain most of these fragments, but use caution when
removing it.
Before replacing a ruptured lamp, clean the lamp compartment and dispose of
cleaning materials. Wash hands after lamp replacement.
When replacing the lamp while the projector is ceiling-mounted, wear
protective eyewear to prevent eye injury.
Hg – Lamp contains mercury. Manage in accordance with local disposal
laws. See www.lamprecycle.org.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus IN2124a and is the answer not in the manual?

InFocus IN2124a Specifications

General IconGeneral
Noise Level32 decibels
White Brightness3500 lumens
Native Resolution1024 x 768
Contrast Ratio15000:1
Aspect Ratio4:3
Throw Ratio Range1.9 - 2.2:1
3Dyes
Focus Adjustmentmanual
Video Inputvga
Inputshdmi
Sound Modemono
Built In Speakersyes
Speakers Output2 watts
Remote Controlyes
OS Compatibilitymac, windows
Weight and Dimensions IconWeight and Dimensions
Depth8.7 inches
Height4.3 inches
Width11.5 inches
Net Weight7.1 pounds

Related product manuals