25
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an
overview of their functions:
Power–turns the projector on and off (page 11).
Auto Image–resets the projector to the source.
Presets–cycles through the available preset settings (page 29).
Keystone–adjusts squareness of the image (page 12).
Menu–opens the on-screen menus (page 28).
Select–confirms choices made in the menus (page 28).
Up/Down arrows–navigates to and adjusts settings in the menus (page 28).
Volume–adjusts sound (page 24).
Source–changes the active source (page 11).
To Next Page
Loading...
