EasyManua.ls Logo

InFocus IN3128HD - User Manual

InFocus IN3128HD
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the InFocus IN3128HD and is the answer not in the manual?

Summary

Important Operating Considerations for Safety

Introduction

Connector Panel

Positioning the Projector

Connecting a Computer Source

Displaying an Image

Adjusting the Image

Connecting a Video Device

Shutting Down the Projector

Troubleshooting Your Setup

Initial Display and Signal Problems

Resolving startup issues, signal errors, and computer connectivity problems.

Image Quality and Orientation

Adjusting image focus, alignment, distortion, and color for optimal display.

Operational and Hardware Issues

Troubleshooting overheating, lamp errors, and specific playback issues.

Using the Remote Control

Using the Audio

Using the Keypad Buttons

Optimizing Images

Optimizing Computer Images

Adjusting projector settings for optimal computer image display.

Optimizing Video Images

Adjusting projector settings for optimal video image display.

Presentation Features

Customizing the Projector

Using the Menus

Basic Menu Settings

Advanced Menu Settings

PIN Settings

Configuring personal identification number (PIN) protection for the projector.

Power and Source Settings

Managing power saving modes, auto source detection, and power-up source selection.

Timer and Altitude Settings

Configuring auto shut-off timers and high altitude operating modes.

Network Configuration

Wired LAN Configuration

Setting up wired network connections, including IP addressing and DHCP.

Wireless LAN Configuration

Configuring wireless network connections, including SSID and connection modes.

Controlling the Projector Remotely

LAN Control

Managing the projector over a local area network using Crestron software.

Web Browser and Wireless Control

Operating the projector via a web browser or wireless connection.

Crestron e-Control and RoomView

Using Crestron e-Control and RoomView for advanced projector management.

Displaying Images

ifPresenter Application

Downloading, installing, and using the ifPresenter application for image transfer.

USB Storage Device Display

Displaying images directly from a USB storage device with various viewing options.

Maintenance

Cleaning the Lens

Instructions for safely cleaning the projector lens.

Replacing the Projection Lamp

Procedure for safely replacing the projector's lamp module.

Summary

Important Operating Considerations for Safety

Introduction

Connector Panel

Positioning the Projector

Connecting a Computer Source

Displaying an Image

Adjusting the Image

Connecting a Video Device

Shutting Down the Projector

Troubleshooting Your Setup

Initial Display and Signal Problems

Resolving startup issues, signal errors, and computer connectivity problems.

Image Quality and Orientation

Adjusting image focus, alignment, distortion, and color for optimal display.

Operational and Hardware Issues

Troubleshooting overheating, lamp errors, and specific playback issues.

Using the Remote Control

Using the Audio

Using the Keypad Buttons

Optimizing Images

Optimizing Computer Images

Adjusting projector settings for optimal computer image display.

Optimizing Video Images

Adjusting projector settings for optimal video image display.

Presentation Features

Customizing the Projector

Using the Menus

Basic Menu Settings

Advanced Menu Settings

PIN Settings

Configuring personal identification number (PIN) protection for the projector.

Power and Source Settings

Managing power saving modes, auto source detection, and power-up source selection.

Timer and Altitude Settings

Configuring auto shut-off timers and high altitude operating modes.

Network Configuration

Wired LAN Configuration

Setting up wired network connections, including IP addressing and DHCP.

Wireless LAN Configuration

Configuring wireless network connections, including SSID and connection modes.

Controlling the Projector Remotely

LAN Control

Managing the projector over a local area network using Crestron software.

Web Browser and Wireless Control

Operating the projector via a web browser or wireless connection.

Crestron e-Control and RoomView

Using Crestron e-Control and RoomView for advanced projector management.

Displaying Images

ifPresenter Application

Downloading, installing, and using the ifPresenter application for image transfer.

USB Storage Device Display

Displaying images directly from a USB storage device with various viewing options.

Maintenance

Cleaning the Lens

Instructions for safely cleaning the projector lens.

Replacing the Projection Lamp

Procedure for safely replacing the projector's lamp module.

InFocus IN3128HD Specifications

General IconGeneral
Native aspect ratio16:9
Projection distance1.2 - 10 m
Projection technologyDLP
Supported aspect ratios4:3, 5:4, 16:9, 16:10
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, vertical-40 - 40 °
Vertical synchronization (max)120 kHz
Vertical synchronization (min)50 kHz
Horizontal synchronization (max)91.1 kHz
Horizontal synchronization (min)30.5 kHz
Projector brightness (economic mode)3400 ANSI lumens
FocusManual
Offset34 %
Throw ratio1.37 - 2.05:1
Focal length range20.72 - 31 mm
Aperture range (F-F)2.41 - 2.97
Lamp power280 W
Light source typeLamp
Lamp power (economic mode)230 W
Service life of light source2000 h
Service life of light source (economic mode)3000 h
3DNo
Full HDYes
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions1920 x 1200 (WUXGA)
RMS rated power20 W
Number of built-in speakers2
Composite video in1
USB connector typeUSB Type-A
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
HDCP-
Noise level33 dB
Preset modesPresentation
CertificationUL / CUL (USA /d Canada), FCC (USA), CE (EU), C-Tick, OM+Eco, CCC+CECP, IRAM, PSB, SASO, CB, Nemco/GS, VCCI, PCT, KC, PSE
Noise level (economic mode)31 dB
On Screen Display (OSD) languagesCHI (SIMPL), CHI (TR), DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, KOR, NOR, POL, POR, RUS, SWE, TUR
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorBlack
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)1 W
Power consumption (typical)360 W
Operating altitude0 - 3048 m
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %
Cables includedAC, VGA
Weight and Dimensions IconWeight and Dimensions
Depth265 mm
Width326 mm
Height122 mm
Weight3700 g
Package depth340 mm
Package width385 mm
Package height245 mm
Package weight4700 g

Related product manuals