What to do if the InFocus IN3134a lamp goes off?
If the lamp goes off, it could be due to power surges. Try re-plugging the power cord and, when the Power LED is on, press the power button. Alternatively, replace the lamp module or put the old lamp back in the projector and have the projector serviced.
How to fix a blurred image on an InFocus IN3134a Projector?
To fix a blurred image, adjust the focus on the projector. You can also press the Auto button on the remote control. Ensure the projector-to-screen distance is within the specified range and check that the projector lens is clean.
What to do if no image appears on the screen of InFocus IN3134a Projector?
If no image appears on the screen, verify the settings on your notebook or desktop PC. Also, try turning off all the equipment and powering everything up again, ensuring the projector is turned on last.
Why is the image reversed on my InFocus IN3134a and how to fix it?
If the image is reversed, check the Projection setting on the Settings 1 menu of the OSD.
How to fix flat image with no contrast on InFocus IN3134a Projector?
To fix a flat image with no contrast, adjust the Contrast setting on the Image menu of the OSD.
What to do if there is no light from the InFocus Projector?
If there is no light from the projector, check that the power cable is securely connected and ensure the power source is working by testing with another electrical device. Restart the projector and check that the Power LED is on. If you have replaced the lamp recently, try resetting the lamp connections. If not, replace the lamp module or put the old lamp back in the projector and have the projector serviced.
What to do if the InFocus Projector does not respond to the remote control?
If the projector isn't responding to the remote, start by pointing the remote control directly at the remote sensor on the front of the projector, ensuring nothing is blocking the path between the remote and the sensor. Try turning off any fluorescent lights or other infrared-enabled devices in the room. Check the battery polarity, and if necessary, replace the battery. If problems persist, replace the remote control.
What to do if there is no sound from InFocus Projector?
If there is no sound, first adjust the volume on the remote control and then adjust the volume of the audio source. Check the audio cable connection and test the source audio output with other speakers. If the problem persists, have the projector serviced.
How to correct trapezoid effect on InFocus IN3134a Projector?
To correct the trapezoid effect, position the projector so it is as perpendicular to the screen as possible. Alternatively, use the Keystone button on the remote control to correct the problem.
What to do if the InFocus Projector image is streaked?
If the image is streaked, set the Frequency and Tracking settings on the Image->Computer menu of the OSD to the default settings. To ensure the problem is not caused by a connected PC’s video card, connect to another computer.
Explains warning symbols and their meanings for safe operation.
Details on positioning, clearance, and ventilation for projector installation.
Guidelines for safe use of the power cord and remote control batteries.
Instructions and warnings for replacing the projector lamp safely.
Details the function and corresponding page for each OSD button and LED indicator.
Describes each port on the rear panel and its function.
Details the buttons on the remote control and their respective functions.
Explains how to use projector controls to adjust image size, sharpness, and shape.
Guides on resetting the lamp hour timer after lamp replacement.
General| Noise Level | 37 decibels |
|---|---|
| White Brightness | 4200 lumens |
| Resolution | 768p |
| Native Resolution | 1024 x 768 |
| Contrast Ratio | 8000:1 |
| Aspect Ratio | 4:3 |
| Throw Ratio Range | 1.81 - 2.71:1 |
| 3D | yes |
| Minimum Screen Size | 21.7 inches |
| Maximum Screen Size | 272 inches |
| Focus Adjustment | manual |
| Optical Zoom | 1.5x |
| Minimum Distance | 4 feet |
| Maximum Distance | 33 feet |
| HDMI Ports | 2 |
| Video Input | vga |
| Inputs | ethernet |
| Sound Mode | mono |
| Built In Speakers | yes |
| Speakers Output | 10 watts |
| Remote Control | yes |
| OS Compatibility | mac, windows |
Weight and Dimensions| Depth | 10.3 inches |
|---|---|
| Height | 4.8 inches |
| Width | 11.2 inches |
| Net Weight | 6.9 pounds |
To Next Page
