20
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an over-
view of their functions:
power–turns the projector on (page 7) and off (page 12).
menu–opens the on-screen menus (page 24).
select–confirms choices made in the menus (page 24).
up/down arrows–navigates to and adjusts settings in the menus (page 24).
auto image–resets the projector to the source.
presets–cycles through the available preset settings (page 26).
keystone–vertical keystone adjusts the squareness of the image (page 8).
You can also adjust the keystone via the menus. See page 25.
volume–adjusts sound (page 22).
source–changes the active source.
menu navigation buttons
To Next Page
Loading...
