InFocus IN3924 User Manual

10
Adjusting the image
If necessary, adjust the height of the projector by pressing the elevator foot release
button to extend the foot.
If necessary, rotate the leveling feet located at the rear of the projector.
Position the projector the desired distance from the screen at a 90 degree angle to
the screen.
See page 7 for a table listing screen sizes and distances.
Adjust the focus.
If the image is not square, first make sure that the projector is perpendicular to the
screen. If the image is larger or smaller on the top or bottom edge of the screen,
press the top Keystone button to reduce the upper part of the image, and press
the bottom Keystone button to reduce the lower part.
If the left or right side of the screen is larger or smaller the other, you can turn the
projector to the left or to the right a few degrees to square the image.
Adjust the Contrast or Brightness in the Basic Menu. See page 26 for help with
these menu adjustments.
adjust distance
adjust focus
adjust keystone
adjust Basic Menu
Aspect Ratio
Auto Image
Brightness
Contrast
Auto Keystone
Keystone
Presets
Sharpness
Volume
Microphone Volume
Ceiling Mount
Advanced Menu
◄ Auto ►
Execute
50
50
Off
0
Presentation
16
16
8
Off
( Basic Menu )
MDL: IN3924
FW: 1.02
adjust height
elevator foot release button
leveling feet

InFocus IN3924 Specifications

General

White Brightness	3000 lumens
Native Resolution	1024 x 768
Contrast Ratio	2, 400:1
Aspect Ratio	4:3
Throw Ratio Range	0.48:1
3D	yes
Minimum Screen Size	49 inches
Maximum Screen Size	74 inches
Minimum Distance	2 feet
Maximum Distance	3 feet
Video Input	vga, hdmi, composite video
Inputs	hdmi, composite video, ethernet, usb, vga
OS Compatibility	mac, windows

Weight and Dimensions

Depth	9.1 inches
Height	5.2 inches
Width	12.9 inches
Net Weight	9.9 pounds