Need help?Do you have a question about the InFocus IN3916 and is the answer not in the manual?
General| Projection distance | 0.75 - 1.65 m |
|---|---|
| Vertical scan range | 23.5 - 85 Hz |
| Horizontal scan range | 31.4 - 91.1 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 3200:1 |
| Screen size compatibility | 1.44 - 3.17 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | ± 30 ° |
| Resolution | 1920 x 1200 pixels |
| Aspect ratio | 16:10 |
| RS-232 ports | 1 |
| Weight (imperial) | 9.9 lbs |
| Dimensions (WxDxH) | 320 x 251.5 x 127 mm |
| Power requirements | 90-264V, 50/60Hz |
| Connectivity technology | Wired |
| Focal length range | - mm |
| Lamp power | 220 W |
| Light source type | Lamp |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 4000 h |
| HD-Ready | Yes |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| DVI port | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| VGA (D-Sub) ports quantity | 3 |
| Noise level | 35 dB |
| Certification | UL, c-UL, FCC, CE, C-Tick Mark, NOM, COFETEL |
| Power source | AC |
| Power consumption (standby) | - W |
| Power consumption (typical) | 238 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Product type | Standard throw projector |
Weight and Dimensions| Weight | 4490 g |
|---|---|
| Package weight | 6580 g |
Details about the projector's technical specifications and where to find them.
Instructions for registering the projector online to activate warranty and receive updates.
Table showing screen sizes and corresponding projection distances and image widths.
Instructions for connecting the projector's power cord to an electrical outlet.
Details on optional connections like audio and monitor out for computer sources.
Instructions on how to adjust the projector's focus for a clear image.
Steps to correct image distortion by adjusting keystone.
How to access the Basic Picture menu for image adjustments.
Details on connecting devices via HDMI for digital audio/video.
Instructions for connecting via composite video cables.
Steps for connecting via VGA cables to the projector.
How to connect via component video using an adapter.
Instructions on how to charge the LiteBoard Wand's battery.
Steps for powering on and using the LiteBoard Wand as a mouse.
Guidance on optimal wand placement and avoiding shadows for better performance.
Different ways to hold the wand and how to switch between multiple wands.
Explanation of wand buttons, tip, and battery indicator light.
Understanding the link light and the location/use of the USB charging connector.
Information about the wand's optical sensor and how to reset the wand.
How to access and configure LiteBoard Wand settings via the projector menu.
Setting screen save time and auto-off time for projector power management.
Step-by-step guide to properly turn off the projector.
General steps to troubleshoot projector setup issues using status indicators.
Solutions for common problems encountered with the remote control.
How to connect audio sources to use the projector's built-in speakers.
Steps to resolve issues when no audio is heard through the projector.
Specifications and usage guidelines for the microphone input.
Features designed to enhance presentations, like Custom key and Screen Save.
Settings to personalize projector setup for specific needs.
How to send text messages for display on the projector via network.
Common image adjustments like brightness, contrast, and color.
More complex image adjustments and settings.
Settings for network, display options, and projector configuration.
Information on projector status, settings, and service options.
Adjusts image intensity, light/dark difference, and edge clarity.
Adjusts color saturation, red-green balance, and resets to source.
Selects image ratio and recalls optimized settings.
Corrects image distortion and reduces display area size.
Enhances color saturation, brightens whites, and adjusts color intensity.
Selects resolution locking, removes image noise, and adjusts horizontal phase.
Aids device syncing, adjusts vertical scan, and selects color spaces.
Reduces image noise, optimizes black levels, and detects film sources.
Enables 3D content display with shutter glasses and synchronization.
Selects display language, configures network, and controls LiteBoard Wand.
Adjusts mic volume, enables key clicks, and assigns custom button functions.
Controls blank screen, mute, aspect ratio, source cycling, and auto image.
Displays source/projector info, manages power saving, and AV mute.
Enables closed captions and configures the blank key display.
Manages automatic power-on, power-off, and screen saving features.
Sets sleep timer, controls standby functions, and manages lamp power.
Controls projector power-on sounds and internal speaker activation.
Assigns specific audio inputs to video/computer source inputs.
Prevents PC screen saver, configures search screen, and captures images.
Adjusts OSD position, transparency, and magnify control behavior.
Enables or locks the keypad and controls the glow ring indicator.
Password protects the projector, requiring a PIN to project an image.
Read-only displays of current source and projector settings.
Read-only display of current LiteBoard™ settings.
Resets lamp hours counter and restores all projector settings to default.
Code used by authorized service personnel only.
Steps to display JPEG images from a USB flash drive.
Instructions for converting PowerPoint to PtG format.
Steps to show a PtG presentation from a USB drive.
Solutions for issues like slow image loading or missing images.
Details on wired and wireless LAN connectivity for LiteShow.
Steps to establish a network connection for LiteShow.
Allows downloading the LiteShow Utility to a computer.
Reviews network and projector information for troubleshooting.
Controls basic picture and setup features via network.
Controls which users are projecting and display layout.
Configures projector settings, alerts, and network management.
Enables AMX control and selects LiteShow display resolution.
Change passwords and restore factory default settings.
Controls advanced projector OSD menu features via network.
Configures email alerts and upgrades the LiteShow Utility.
Controls image projection, refresh, pause, and stop.
Manages user projection and display quadrant assignments.
Instructions for safely cleaning the projector lens.
How to use the projector's security lock feature with a cable.
To Next Page
