InFocus IN3916 User Manual

7
Connecting a computer source
USB Mini B connection
Connect the USB cable to your computer's USB A connector and to the projector's
USB mini B connector.
To display images over USB: If this is the fir
st time you have used the USB
Display feature, an Auto-Play screen will appear within a minute. Click Start USB
Display. (Note: If the Auto-Play screen does not appear, browse to the CD Drive
USB Display on your computer and double-click the DLUSB.Cab file to initiate
manually.)
Within a minute, your computer
image should display
.
To stop displaying your computer
image over the USB cable: Disconnect the
USB cable from the projector and/or laptop or change the selected source on the
projector.
To advance slides in a PowerP
oint presentation using the remote control: Press
the up and down arrow buttons on the remote control to move through your slides.
VGA connection
Connect one end of the provided computer cable to the VGA 1/VGA 2 connector
on the projector and the other to the VGA connector on your computer. If you are
using a desktop computer, you will need to disconnect the monitor cable from the
computer’s video port first.
HDMI 1.3 connection
HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI
provides an interface between sources, such as set-top boxes, DVD players, and
receivers and your projector. Plug an HDMI cable into the video-out connector on
the video device and into the HDMI connector on the projector.
To take advantage of HDMI 1.3 Deep Color (30 bit), you must have a 1.3-
c
o
mpatible source.
Connecting power
Connect the black power cord to the Power connector on the rear of the projector
and to your electrical outlet. The Power light on the Status Indicator Panel (page 16)
turns amber. NOTE: Always use the power
cord that shipped with the projector.
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio 1 connector on the projector. You may
also need an adapter.
To display a presentation using a USB flas
h d
rive, see the Using LitePort (page 37).
This feature displays JPEG images and Presentation-to-Go presentation,
eliminating the need for a computer source.
If you are using a desktop computer and want to see the image o
n your computer
screen as well as on the projection screen, connect the computer’s monitor cable to
the Monitor Out connector on the projector.
USBA
USBmini B
MOLEX
MOLEX
connect USB cable
USBA
USBmini B
connect VGA cable

InFocus IN3916 Specifications

General

Projection distance	0.75 - 1.65 m
Vertical scan range	23.5 - 85 Hz
Horizontal scan range	31.4 - 91.1 kHz
Projection technology	DLP
Contrast ratio (typical)	3200:1
Screen size compatibility	1.44 - 3.17 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	± 30 °
Resolution	1920 x 1200 pixels
Aspect ratio	16:10
RS-232 ports	1
Weight (imperial)	9.9 lbs
Dimensions (WxDxH)	320 x 251.5 x 127 mm
Power requirements	90-264V, 50/60Hz
Connectivity technology	Wired
Focal length range	- mm
Lamp power	220 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	4000 h
HD-Ready	Yes
Analog signal format system	NTSC, PAL, SECAM
RMS rated power	10 W
Number of built-in speakers	2
DVI port	No
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
VGA (D-Sub) ports quantity	3
Noise level	35 dB
Certification	UL, c-UL, FCC, CE, C-Tick Mark, NOM, COFETEL
Power source	AC
Power consumption (standby)	- W
Power consumption (typical)	238 W
Operating temperature (T-T)	5 - 40 °C
Product type	Standard throw projector

Weight and Dimensions

Weight	4490 g
Package weight	6580 g