EasyManuals Logo

InFocus IN3916 User Manual

InFocus IN3916
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
47
Replacing the projection lamp
The Lamp Hours timer in the Projector Info menu counts the number of hours the
lamp has been in use. Twenty hours before the lamp life expires, the message
“Replace lamp” appears on the screen at startup.
IMPORTANT NOTE:
Always use the InFocus lamp module designed for your projector model. Look
at
the 8th character of the projectors serial number (located on the bottom of
the projector and in the Service and Support>Projector Info submenu).
If the 8th character is a “0” (Example: BFQMyww0
nnnn) Use SP-LAMP-062
If the 8th character is an “A” (
Example: BFQMywwAnnnn) Use SP-LAMP-
062A
These lamps are NOT interchangeable, and are only designed to fit
into compatible products.
Be sure to use the InFocus lamp module designed for this projector. You can
order new lamps from www.infocus.com (in select areas), your retailer or your
dealer. Only genuine InFocus lamps are tested for use in this projector. Use
of non InFocus lamps may cause electrical shock and fire, and may void the
projector warranty. InFocus is not liable for the performance, safety or
certification of any other lamps.
WARNINGS:
The projector uses a high-pressure mer
cury glass lamp. The lamp may fail
prematurely, or it may rupture with a popping sound if jolted, scratched, or
handled while hot. The risk of lamp failure or rupture also increases as the
lamp age increases; please replace the lamp when you see the “Replace Lamp”
message.
To avoid burns, allow the projector to cool for at least 60 minutes before you
replace the lamp.
Unplug the power cord before replacing the lamp.
Do not drop the lamp module. The glass may shatter and cause injury.
Do not touch the glass surface of the lamp module. Fingerprints can obscure
projection sharpness and may cause the glass to shatter.
Be extremely careful when removing the lamp housing. In the unlikely event
that the lamp ruptures, small glass fragments may be generated. The lamp
module is designed to contain most of these fragments, but use caution when
removing it.
Before replacing a ruptured lamp, clean the lamp compartment and dispose of
cleaning materials. Wash hands after lamp replacement.
When replacing the lamp while the projector is ceiling-mounted, wear
protective eyewear to prevent eye injury.
Hg – Lamp contains mercury. Manage in accordance with local
disposal laws. See www.lamprecycle.org.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus IN3916 and is the answer not in the manual?

InFocus IN3916 Specifications

General IconGeneral
Projection distance0.75 - 1.65 m
Vertical scan range23.5 - 85 Hz
Horizontal scan range31.4 - 91.1 kHz
Projection technologyDLP
Contrast ratio (typical)3200:1
Screen size compatibility1.44 - 3.17 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical± 30 °
Resolution1920 x 1200 pixels
Aspect ratio16:10
RS-232 ports1
Weight (imperial)9.9 lbs
Dimensions (WxDxH)320 x 251.5 x 127 mm
Power requirements90-264V, 50/60Hz
Connectivity technologyWired
Focal length range- mm
Lamp power220 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)4000 h
HD-ReadyYes
Analog signal format systemNTSC, PAL, SECAM
RMS rated power10 W
Number of built-in speakers2
DVI portNo
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
VGA (D-Sub) ports quantity3
Noise level35 dB
CertificationUL, c-UL, FCC, CE, C-Tick Mark, NOM, COFETEL
Power sourceAC
Power consumption (standby)- W
Power consumption (typical)238 W
Operating temperature (T-T)5 - 40 °C
Product typeStandard throw projector
Weight and Dimensions IconWeight and Dimensions
Weight4490 g
Package weight6580 g

Related product manuals