InFocus IN3916 User Manual

5
Connector panel
The projector provides both computer and video connection options, including:
• VGA computer
• Composite video
• HDMI
• USB mini B connector. Used for USB Display
, slide advance (and mouse
control when used with an optional remote control only) and LiteBoard™
Wand control.
• USB A connector. Used for LitePort (JPEG images displayed from USB flash
drive)
and WLAN.
•
Monitor out, for VGA pass through to an external monitor.
• Audio input for video and computer.
• Audio L/R for video and computer.
• Audio output to external speakers.
• Microphone, for connecting to a dynamic microphone.
• LAN (RJ45) connector for networ
k control and web server.
• Serial Control (DB9) connector for RS-232 serial
control. Command control
codes are on our support website at www.infocus.com/support.
• 5 volt DC output. The coaxial connector
accep
ts a 2.1mm x 5.5mm plug and
provides a constant 5 volt, 2 amp DC output when the projector is on. It is
designed to provide power for an InFocus LiteShow wireless device, which
allows wireless projection. More information can be found on our website at
www.infocus.com or at your retailer or dealer.
USB A
USB mini B
RJ45 port
microphone
computer
composite
video
audio in/out
security lock
audio L/R
monitor
out
serial control
5 volt output
HDMI
USB mini
USB A

InFocus IN3916 Specifications

General

Projection distance	0.75 - 1.65 m
Vertical scan range	23.5 - 85 Hz
Horizontal scan range	31.4 - 91.1 kHz
Projection technology	DLP
Contrast ratio (typical)	3200:1
Screen size compatibility	1.44 - 3.17 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	± 30 °
Resolution	1920 x 1200 pixels
Aspect ratio	16:10
RS-232 ports	1
Weight (imperial)	9.9 lbs
Dimensions (WxDxH)	320 x 251.5 x 127 mm
Power requirements	90-264V, 50/60Hz
Connectivity technology	Wired
Focal length range	- mm
Lamp power	220 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	4000 h
HD-Ready	Yes
Analog signal format system	NTSC, PAL, SECAM
RMS rated power	10 W
Number of built-in speakers	2
DVI port	No
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
VGA (D-Sub) ports quantity	3
Noise level	35 dB
Certification	UL, c-UL, FCC, CE, C-Tick Mark, NOM, COFETEL
Power source	AC
Power consumption (standby)	- W
Power consumption (typical)	238 W
Operating temperature (T-T)	5 - 40 °C
Product type	Standard throw projector

Weight and Dimensions

Weight	4490 g
Package weight	6580 g