43
Downloading the LiteShow Utility:
To begin projecting over the local network or wirelessly, the LiteShow Utility must
be installed and running on your computer or PDA. This Utility is needed to man-
age the communication between your comput
er/PDA and the LAN-connected pro-
jector.
1 Turn the projector on, hit the Source button and select LAN. The LiteShow
splash screen should appear within one minute.
2 You must be connected to the projector through a wired or wireless LAN. For
wireless LAN, connect to the wireless network using the same SSID as shown
on the projector.
3 Enter the IP address displayed on the projector into your web browser. (Note:
The default IP address of LiteShow is 192.168.100.10)
4 Login as None and select Download.
5 Download and install the appropriate LiteShow application based on your oper-
ating system (Windows 7/Vista/XP/2000, Wi
ndows Mobile 5.0 or Macbook
10.4 and later).
6 Follow the Installation Wizard instructions.
7 Once the installation is complete, a LiteShow shortcut will be available on your
desktop.
To Next Page
Loading...
