— 34 —
Settings 2 Menu
Press the MENU button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move up and down in the Settings 2 menu.
I
TEM
D
ESCRIPTION
Auto Source Press ◄► to enter and enable or disable automatic source detection.
No Signal Power
Off (min.)
Press ◄► to enter and enable or disable automatic shutdown of the lamp when no
signal is detected.
Auto Power On
Press ◄► to enter and enable or disable automatic power On when AC power is
supplied.
Lamp Mode
Press ◄► to enter and select the lamp mode for higher brightness or lower brightness
to save lamp life.
Reset All Press (Enter) / ► to reset all settings to default values.
Status
Press (Enter) / ► to enter the Status menu. See page 35 for more information on
Status.
Advanced 1
Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
page 36.
Advanced 2 Press (Enter) / ► to enter the Advanced 2 menu. Advanced 2 Feature on page 39
To Next Page
Loading...
Need help?
General
