24
Advanced menu
Remember that not all options in the menus are available for all sources/
signals.
Phase: adjusts the horizontal phase of a computer
source.
Tr ac k i ng : adjusts the vertical scan of a
computer source.
Horizontal/Vertical Position: ad
justs the position of a computer source.
Sync Threshold Adjust: (progressive signals only) If a hardware device,
such as a DVD player, is not syncing properly with the projector, adjust this
option to help it to sync when connected to the projector.
Flesh Tone Correction: this modifies
colors to make the skin complexion
better.
Black Level Calibration (IN78 only): auto
matically adjusts brightness to
get the best black level. Before using, make sure there are black bars at the
top, bottom, or sides of the image.
Film Mode: co
nt
rols deinterlacing and is On by default. When checked, it
assumes the incoming signal is film material and optimizes the image
accordingly.
Sharpness: (vid
eo so
urces only) changes the clarity of the edges of a video
image. Select a sharpness setting.
Color Space:
This
option applies to computer and component video
sources. It allows you to select a color space that has been specifically tuned
for the input signal. When Auto is selected, the projector automatically
determines the standard. To choose a different setting, turn off Auto, then
choose RGB for computer sources, choose either REC709 or REC601 for
component video sources.
Advanced menu
Sharpness
Color Space
To Next Page
Loading...
Need help?
General
