23
Presets: This allows you to customize settings and save the settings to be
restored later. To restore the factory default settings, choose Factory Reset in
the Settings>Service menu.
To set a preset for the current source, adjust the image, select Sa
v
e Settings
in the Presets menu, then choose Save User 1, 2, or 3. You can recall these
settings in the future by selecting the appropriate user presets. All settings
in the Picture menu (except Keystone) are saved and recalled.
ISF Day/Night (IN78 only): Su
pports ce
rtified Imaging Science Inc. calibra-
tion. ISF presets are not available until after cali
bration is performed, and
picture settings cannot be adjusted when ISF presets are active. For more
information go to www.infocus.com/service.
Gamma: Gamma tables contain preset intensity configur
ations optimized
for the input source. You can select a gamma table that has been specifically
tuned for either film, CRT (Cathode Ray Tube), video, PC, or Bright Room
input. (Film input is material originally captured on a film camera, like a
movie; video input is material originally captured on a video camera, like a
TV show or sporting event.) White Peaking increases the brightness of
whites that are near 100%.
NOTE: Y
our viewing preferences may vary. Cycle through the gamma
options and pick the one you like the best.
Presets
Save
User
Settings
Gamma
To Next Page
Loading...
Need help?
General
