InFocus Quantum Laser Core Series - Adjusting the Image Colour Temperature; Adjusting the Sharpness; Magnifying the Image; Selecting an Aspect Ratio

8.3 ADJUSTING THE IMAGE COLOUR TEMPERATURE
The Display settings are only visible when an active source is connected to the projector.
1.
Select Display > Image Settings > Color Settings > Color Temperature.
2.
Select a value.
3.
Press Enter.
8.4 ADJUSTING THE SHARPNESS
1.
Select Display > Image Settings > Color.
2.
Press Enter.
8.5 MAGNIFYING THE IMAGE
1.
Select Display > Zoom.
2.
Press Enter.
8.6 SELECTING AN ASPECT RATIO
1.
Select Display > Aspect Ratio.
2.
Select an aspect ratio.
3.
Press Enter.
8.7 ADJUSTING THE BRIGHTNESS
1.
Select Display > Image Settings > Brightness Mode.
2.
Select a brightness mode.
3.
Press Enter.
38