InFocus Quantum Laser Core Series - Page 58

Level 1
(Sub)
Level 2
(Sub)
Level 3
(Sub)
Level 4
(Sub)
Data Remark
Default Value
Options
Auto Source Off
Off / On
(ICON)
1. Off: only search the current input selection. Press the Source
button to display a list of sources.
2. On: automatically finds an available input source. Press the
Source button to automatically detect the next source. 3. Auto
source scan sequence: HDMI 1 (Default)->HDMI 2->VGA IN-
>VIDEO
Input Source
@ HDMI 1
HDMI 2
VGA
VIDEO
High Altitude Off
Off / On
(ICON)
Logo Default
Default /
Neutral
1. Default: customer logo 2. Neutral: same as below
Background Color setting
Background
Color
@ Black (ICON)
Blue (ICON)
Red (ICON)
Green (ICON)
Gray (ICON)
Logo (ICON) Same as above Logo setting
Reset
Reset to
Default
Cannot reset network setting and Light Source Hours
NETWORK MENU
Level 1
(Sub)
Level 2
(Sub)
Level 3
(Sub)
Level 4
(Sub)
Data Remark
Default Value
LAN
Network
Status
(DisplayOnly)
Disconnect /
Connected
(ICON)
MAC Address (DisplayOnly)
AA : BB : CC :
DD : EE : FF
DHCP On Off / On (ICON)
IP Address
By DHCP
server
xxx.xxx.xxx.xxx
1. Gray out these while DHCP is On
2. When DHCP is Off, default IP configure setting: IP
Address: 192.168.0.100 Subnet Mask: 255.255.255.0
Gateway: 192.168.0.254 DNS: 192.168.0.51
Subnet Mask xxx.xxx.xxx.xxx
Gateway xxx.xxx.xxx.xxx
DNS xxx.xxx.xxx.xxx
Reset Include LAN and Control
Control
Crestron On Off / On (ICON) Port 41794
Extron On Off / On (ICON) Port 2023
PJ Link On Off / On (ICON) Port 4352
AMX Device
Discovery
On Off / On (ICON) Port 9131
Telnet On Off / On (ICON) Port 23
HTTP On Off / On (ICON) Port 80 : Webpage control
58
*
* Not on Core Models